View G065VN01V0_2320994.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

document version 0.1 1/26 product specification g065vn01 v0 date: march 6, 2006 product specification 6.5 vga color tft-lcd module model name: g065vn01 v.0 (v) preliminary specifications ( ) final specifications note: this specification is subject to change without notice. www..net
document version 0.1 2/26 product specification g065vn01 v0 contents 1. handling precautions...............................................................4 2. general description.................................................................5 2.1 display characteristics...................................................................................................................5 2.2 optical characteristics....................................................................................................................6 3. functional block diagram......................................................10 4. absolute maximum ratings...................................................11 4.1 absolute ratings of tft lcd module........................................................................................11 4.2 absolute ratings of backlight unit...............................................................................................11 4.3 absolute ratings of environment.................................................................................................11 5. electrical characteristics.......................................................12 5.1 tft lcd module........................................................................................................................12 5.2 backlight unit..............................................................................................................................14 6. signal characteristic..............................................................15 6.1 pixel format image......................................................................................................................15 6.2 the input data format.................................................................................................................16 6.3 signal description........................................................................................................................18 6.4 interface timing...........................................................................................................................19 6.5 power on/off sequence............................................................................................................21 7. connector & pin assignment..................................................22 7.1 tft lcd module: lvds connector...........................................................................................22 7.2 backlight unit: lamp connector..................................................................................................22 7.3 lamp connector pin assignment..................................................................................................22 8. reliability, shock & vibration test criteria............................23 9. mechanical characteristics....................................................24 9.1 lcm outline dimension (front view).........................................................................................24 9.2 lcm outline dimension (rear view)..........................................................................................25 9.3 screw hole depth and center position.........................................................................................26 www..net
document version 0.1 3/26 product specification g065vn01 v0 record of revision version and date page old description new description remark 0.1 march 6, 2006 all first edition to all customer www..net
document version 0.1 4/26 product specification g065vn01 v0 1. handling precautions 1) since front polarizer is easily damaged, pay attention not to scratch it. 2) be sure to turn off power supply when inserting or disconnecting from input connector. 3) wipe off water drop immediately. long contact with water may cause discoloration or spots. 4) when the panel surface is soiled, wipe it with absorbent cotton or other soft cloth. 5) since the panel is made of glass, it may break or crack if dropped or bumped on hard surface. 6) since cmos lsi is used in this module, take care of static electricity and insure human earth when handling. 7) do not open nor modify the module assembly. 8) do not press the reflector sheet at the back of the module to any directions. 9) in case if a module has to be put back into the packing container slot after once it was taken out from the container, do not press the center of the ccfl reflector edge. instead, press at the far ends of the cfl reflector edge softly. otherwise the tft module may be damaged. 10) at the insertion or removal of the signal interface connector, be sure not to rotate nor tilt the interface connector of the tft module. 11) after installation of the tft module into an enclosure (notebook pc bezel, for example), do not twist nor bend the tft module even momentary. at designing the enclosure, it should be taken into consideration that no bending/twisting forces are applied to the tft module from outside. otherwise the tft module may be damaged. 12) cold cathode fluorescent lamp in lcd contains a small amount of mercury. please follow local ordinances or regulations for disposal. 13) small amount of materials having no flammability grade is used in the lcd module. the lcd module should be supplied by power complied with requirements of limited power source (, iec60950 or ul1950), or be applied exemption. 14) the lcd module is designed so that the cfl in it is supplied by limited current circuit (iec60950 or ul1950). do not connect the cfl in hazardous voltage circuit. www..net
document version 0.1 5/26 product specification g065vn01 v0 2. general description g065vn01 v0 is a color active matrix liquid crystal display composed of a tft lcd panel, a driver circuit, and backlight system. the screen format is intended to support the vga (640(h) x 480(v)) screen and 16.2m (rgb 8-bits) or 262k colors (rgb 6-bits). all input signals are lvds interface compatible. inverter card of backlight is not included. g065vn01 v0 is designed for human machine interface and for industrial display use. 2.1 display characteristics the following items are characteristics summary on the table under 25 condition: items unit specifications screen diagonal [inch] 6.5 active area [mm] 132.48(h) x 99.36(v) pixels h x v 640x3(rgb) x 480 pixel pitch [mm] 0.069 x 0.207 pixel arrangement r.g.b. vertical stripe display mode tn, normally white typical white luminance (5 point average) [cd/m 2 ] 500 typ. (icfl=5.0ma) 400 typ. (icfl=3.8ma) luminance uniformity 80% min. (5 points) contrast ratio 450:1 typ. response time [msec] 26 typ. nominal input voltage vdd [volt] 3.3 typ. typical power consumption [watt] 4.5w (icfl=5.0ma) 3.84w (icfl=3.8ma) all black pattern weight [grams] 210g typ. physical size [mm] 153.0x 118.0 x 10.7 (typ.) electrical interface 1 channel lvds surface treatment anti-glare, hardness 3h, support color 16.2m / 262k colors temperature range operating storage (non - operating) [ o c] [ o c] -10 to +70 - 20 to + 8 0 rohs compliance rohs compliance www..net
document version 0.1 6/26 product specification g065vn01 v0 2.2 optical characteristics the optical characteristics are measured under stable conditions at 25 (room temperature): item unit conditions min. typ. max. note ccfl 5.0ma 5 points average tbd 500 - white luminance [cd/m2] ccfl 3.8 ma 5 points average tbd 400 - 1,2 5 points 80% uniformity % 13 points 60% 1, 2, 3 contrast ratio tbd 450 - cross talk % tbd 5 [msec] rising - 15 19 [msec] falling - 11 16 response time [msec] raising + falling 26 35 6 [degree] [degree] horizontal (right) cr = 10 (left) - - 70 70 - - viewing angle [degree] [degree] vertical (upper) cr = 10 (lower) - - 60 60 - - 7 red x tbd tbd tbd red y tbd tbd tbd green x tbd tbd tbd green y tbd tbd tbd blue x tbd tbd tbd blue y tbd tbd tbd white x 0.293 0.313 0.343 color / chromaticity coordinates (cie 1931) white y 0.299 0.329 0.350 note 1: 5 points position (display active area : 132.48mm(w) x 99.36mm(h)) 12 3 45 h/4 h/4 h/4 h/4 h w w/4 w/4 w/4 w/4 www..net
document version 0.1 7/26 product specification g065vn01 v0 note 2: 13 points position w/4 w w/4 h h/4 h/4 h/4 h/4 7 9 10 w/4 1 8 w/4 10 10 10 10 2 3 13 12 4 5 6 11 note 3: the luminance uniformity of 5 and 13 points is defined by dividing the maximum luminance values by the minimum test point luminance note 4: measurement method the lcd module should be stabilized at given temperature for 30 minutes to avoid abrupt temperature change during measuring. in order to stabilize the luminance, the measurement should be executed after lighting backlight for 30 minutes in a stable, windless and dark room. w13 = m axi mum brightness of thir teen points m ini mum brightness of thirteen points maximum brightness of five points w5 = m inimum brightness of five points center of the screen tft-lcd 50 cm photo detector lcd panel field=2 www..net
document version 0.1 8/26 product specification g065vn01 v0 note 5 definition of cross talk (ct) ct = | y b C y a | / y a 100 (%) where y a = luminance of measured location without gray level 0 pattern (cd/m 2 ) y b = luminance of measured location with gray level 0 pattern (cd/m 2 ) note 6: definition of response time: the output signals of bm-7 or equivalent are measured when the input signals are changed from black to white (falling time) and from white to black (rising time), respectively. the response time interval between the 10% and 90% of amplitudes. refer to figure as below. s i g n a l ( r e l a t i v e v a l u e ) "black" tr tf "white" "white" 0% 10% 90% 100% www..net
document version 0.1 9/26 product specification g065vn01 v0 note 7. definition of viewing angle viewing angle is the measurement of contrast ratio 10, at the screen center, over a 180 horizontal and 180 R vertical range (off-normal viewing angles). the 180 viewing angle range is broken down as follows; 90 ( ) horizontal left and right and 90 ( ) vertical, high (up) and low (down). the measurement direction is typically perpendicular to the display surface with the screen rotated about its center to develop the desired measurement viewing angle. www..net
document version 0.1 10/26 product specification g065vn01 v0 3. functional block diagram the following diagram shows the functional block of the 6.5 inches color tft/lcd module: 2 ccfl inverter dc power gamma correction generation circuit dc/dc converter r c o n n e c t e r dc power lvds tft-lcd 640*(3)*480 pixels g a t e d r i v e r i c source driver ic panel controller lvds receiver auo asic g48 s1 s192 lvds connector (31 pin) hirose df9b-31p-1v adaptable plug : df9b-31s-1v lamp connector (4 pin) bhr-04vs-1 mating type: sm04(4.0)b-bhs-1-tb g1 www..net
document version 0.1 11/26 product specification g065vn01 v0 4. absolute maximum ratings absolute maximum ratings of the module are as below: 4.1 absolute ratings of tft lcd module item symbol min max unit conditions logic/lcd drive vin -0.3 +4.0 [volt] note 1,2 4.2 absolute ratings of backlight unit item symbol min max unit conditions ccfl current icfl - tbd [ma] rms note 1,2 4.3 absolute ratings of environment item symbol min max unit conditions operating temperature top -10 +70 [ o c] note 3 operation humidity hop 8 95 [%rh] note 3 storage temperature tst -20 +80 [ o c] note 3 storage humidity hst 5 95 [%rh] note 3 note 1: with in ta (25 ) note 2: permanent damage to the device may occur if exceed maximum values www..net
document version 0.1 12/26 product specification g065vn01 v0 5. electrical characteristics 5.1 tft lcd module 5.1.1 power specification input power specifications are as follows; symble parameter min typ max units condition vdd logic/lcd drive voltage 3.0 3.3 3.6 [volt] pdd vdd power 0.9 [watt] max: all black pattern idd idd current 270 ma max: all black pattern i rush inrush current tbd ma vddrp allowable logic/lcd drive ripple voltage 100 [mv] p-p note 1 : measurement conditions: q3 ao6402 g d 2 s d 1 d 5 d 6 q3 ao6402 g d2 s d1 d5 d6 c1 1uf/16v c2 1uf/25v c3 0.01uf/25v f1 vr1 47k +12.0v vcc sw1 sw mag-spst 1 2 (high to low) control signal (lcd module input) r2 1k +3.3v r1 47k r2 1k 90% 10% vcc rising time 0v 3.3v 0.5ms www..net
document version 0.1 13/26 product specification g065vn01 v0 5.1.2 signal electrical characteristics input signals shall be low or hi-z state when vdd is off. item symbol min. typ. max. unit condition differential input voltage vid 0.25 0.35 0.45 v lvds input common mode voltage vcm 1.125 1.25 1.375 v vth/vtl=+-100mv differential input high threshold voltage vth - - 100 mv differential input low threshold voltage vtl -100 - - mv vcm=1.25v www..net
document version 0.1 14/26 product specification g065vn01 v0 5.2 backlight unit parameter guideline for ccfl inverter parameter min typ max units condition - 500 - (ta=25) ,icfl=5ma white luminance 5 points average - 400 - [cd/m 2 ] (ta=25) ,icfl=3.8ma ccfl current(icfl) tbd 5 tbd [ma] rms (ta=25) note 1 ccfl frequency(fcfl) 50 60 70 [khz] (ta=25) note 2 650 - - (ta=25 ) ccfl ignition voltage(vs) 1430 - - [volt] rms (ta= -10) - 365 - (ta=25) ,icfl=5ma ccfl voltage (reference) (vcfl) - 386.6 - [volt] rms (ta=25) ,icfl=3. 8ma - 3.65 - ccfl power consumption (pcfl) - 2.94 - [watt] (ta=25) ,icfl=5ma note 3 (ta=25) ,icfl=3. 8ma note 1: the display is with dual lamp design, and the ccfl current in above table refers to each lamp. note 2: ccfl discharge frequency should be carefully determined to avoid interference between inverter and tft lcd. note 3: calculator value for reference (icfl vcfl x2 =pcfl) www..net
document version 0.1 15/26 product specification g065vn01 v0 6. signal characteristic 6.1 pixel format image following figure shows the relationship of the input signals and lcd pixel format. www..net
document version 0.1 16/26 product specification g065vn01 v0 6.2 the input data format sel68 = high or nc for 6 bits lvds input g0 r5r4r3r2 r1r0 devshs b5b4 b3b2 b1b0 g5g4g3 g2g1 rxclkin rxin1 rxin2 rxin3 sel68 = low for 8 bits lvds input g0 r5r4r3r2 r1r0 rsv b7b6 g7g6 r7r6 devshs b5b4 b3b2 b1b0 g5g4g3 g2g1 rxclkin rxin1 rxin2 rxin3 rxin4 www..net
document version 0.1 17/26 product specification g065vn01 v0 the signal description is listed as following. signal name description remark r7 r6 r5 r4 r3 r2 r1 r0 red data 7 red data 6 red data 5 red data 4 red data 3 red data 2 red data 1 red data 0 red-pixel data for 8bits lvds input msb: r7 ; lsb: r0 for 6bits lvds input msb: r5 ; lsb: r0 g7 g6 g5 g4 g3 g2 g1 g0 green data 7 green data 6 green data 5 green data 4 green data 3 green data 2 green data 1 green data 0 green-pixel data for 8bits lvds input msb: g7 ; lsb: g0 for 6bits lvds input msb: g5 ; lsb: g0 b7 b6 b5 b4 b3 b2 b1 b0 blue data 7 blue data 6 blue data 5 blue data 4 blue data 3 blue data 2 blue data 1 blue data 0 blue-pixel data for 8bits lvds input msb: b7 ; lsb: b0 for 6bits lvds input msb: b5 ; lsb: b0 rxclkin lvds data clock de data enable signal when the signal is high, the pixel data shall be valid to be displayed. vs vertical synchronous signal hs horizontal synchronous signal note: output signals from any system shall be low or hi-z state when vdd is off. www..net
document version 0.1 18/26 product specification g065vn01 v0 6.3 signal description the module uses a lvds receiver embedded in auo s asic. lvds is a differential signal technology for lcd interface and high-speed data transfer device. note : input signals shall be in low status when vdd is off. pin no. symbol pin description 1 gnd ground 2 gnd ground 3 rxin3+ nc for 6 bits lvds input 4 nc no connection 5 rxin3- nc for 6 bits lvds input 6 nc no connection 7 gnd ground 8 dps selection of scan direction dps="low" or "nc", normal scan. dps="high", reverse scan. 9 rxclkin+ lvds differential clock input 10 nc no connection 11 rxclkin- lvds differential clock input 12 nc no connection 13 gnd ground 14 gnd ground 15 rxin2+ lvds differential input(blue2-blue5, hsync, vsync, de) 16 gnd ground 17 rxin2- lvds differential input(blue2-blue5, hsync, vsync, de) 18 nc no connection 19 gnd ground 20 nc no connection 21 rxin1+ lvds differential input(green1-green5, blue0, blue1) 22 nc no connection 23 rxin1- lvds differential input(green1-green5, blue0, blue1) 24 nc no connection 25 gnd ground 26 sel68 selection for either 6 bit or 8bit lvds input: sel68= high or nc , accepts 6 bits lvds data input; sel68= low , accepts 8 bits lvds data input. 27 rxin0+ lvds differential input(red0-red5, green0) 28 vcc power supply 29 rxin0- lvds differential input(red0-red5, green0) 30 vcc power supply 31 gnd ground www..net
document version 0.1 19/26 product specification g065vn01 v0 6.4 interface timing 6.4.1 timing characteristics parameter symbol min. typ. max. unit condition clock frequency 1/ t clock 20 25.2 50 mhz 1,2 period t v 520 525 622 active t vd 480 480 480 vertical section blanking t vb 40 45 142 t line 1,2 period t h 770 800 1070 active t hd 640 640 640 horizontal section blanking t hb 130 160 430 t clock 1,2 note 1: frame rate is 60 hz. note 2: de mode. www..net
document version 0.1 20/26 product specification g065vn01 v0 6.4.2 input timing diagram dotclk de t h t hb t hd de t v t vb t vd input timing definition ( de mode) t clock input data pixel 1 pixel 2 pixel 3 pixel n-1 pixel n invaild data invaild data pixel 1 www..net
document version 0.1 21/26 product specification g065vn01 v0 6.5 power on/off sequence vdd power and lamp on/off sequence is as follows. interface signals are also shown in the chart. signals from any system shall be hi-z state or low level when vdd is off. power supply vdd interface singal backlight on 0v 0v 0v 10 % 90 % 10 % t1 t2 t3t4 t5 10 %10 % 10 % 90 % t6 10 % t7 power on/off sequence timing value parameter min. typ. max. units t1 0.5 - 10 ms t2 0 - 50 ms t3 0 - 50 ms t4 0 - 10 ms t5 180 - - ms t6 180 - - ms t7 500 - - ms www..net
document version 0.1 22/26 product specification g065vn01 v0 7. connector & pin assignment physical interface is described as for the connector on module. these connectors are capable of accommodating the following signals and will be following components. 7.1 tft lcd module: lvds connector connector name / designation for signal connector manufacturer hirose or compatible connector model number df9b-31p-1v adaptable plug df9b-31s-1v 7.2 backlight unit: lamp connector connector name / designation for lamp connector manufacturer jst or compatible connector model number bhr-04vs-1 mating model number sm04(4.0)b-bhs-1-tb 7.3 lamp connector pin assignment pin # cable color signal name 4 white lamp low voltage 3 nc no connection 2 pink lamp high voltage 1 pink lamp high voltage www..net
document version 0.1 23/26 product specification g065vn01 v0 8. reliability, shock & vibration test criteria items required condition note temperature humidity bias 40/90%,300hr high temperature operation 70,300hr low temperature operation -10,300hr on/off test 25,167hrs(on/10 sec. off/10sec., 30,000 cycles) hot storage 80,300 hours cold storage -20,300 hours thermal shock test -20/30 min ,60/30 min ,100cycles hot start test 70/1 hr min. power on/off per 5 minutes, 5 times cold start test -10/1 hr min. power on/off per 5 minutes, 5 times esd contact : 8kv/ operation, class b air : 15kv / operation, class b note 1 shock test (non-operating) 50g,11ms,half-sine wave,(+-x,+-y,+-z) vibration test (non-operating) 1.5g, 50~500~50hz, sine wave 30mins/axis, 3 direction (x, y, z) note1: according to en61000-4-2 , esd class b: some performance degradation allowed. no data lost . self-recoverable. no hardware failures. www..net
document version 0.1 24/26 9. mechanical characteristics 9.1 lcm outline dimension (front view) www..net
document version 0.1 25/26 9.2 lcm outline dimension (rear view) www..net
document version 0.1 26/26 9.3 screw hole depth and center position screw hole minimum depth, from side surface =2.5 0.3mm (see drawing) screw hole center location, from front surface = 3.1 0.3mm (see drawing) screw torque: maximum 2.0 kgf-cm www..net

▲Up To Search▲

Price & Availability of G065VN01V0

	To Download G065VN01V0 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .